We often use the sensor with the instrument shows or cooperate with software on the computer display. Are frequently below I use with a sensor or multiple sensors, but we often meet with in daily use process kinds at the same time, use a variety of sensors to measure, in this case, we can make a variety of the parameters of the sensor in an interface display?

To the various sensor measurements are displayed on an interface can be implemented, with pressure sensor and temperature sensor for example, in the factory on measuring we usually need to use waste water or exhaust gas pressure sensor and temperature sensor, the measured data of we want to let them in on a screen shows that there are many ways, such as we can with multi-channel instrument, each channel by different sensors can be realized, but in this case if you want to make the instrument to the sensor power supply, this instrument is not pick up too many sensors, generally take 2-5 will not be able to pick up again, because the instrument can't drive too much sensors work, and there will be interference between each sensor. Another way is through the implementation of computer software, and of course for digital signal output we can connect directly to computer implementation, the analog signal output we can add a converter, the converter can convert analog signals to digital signals. The converter has stabilized sold on the market now. For different sensors, of course, is not the same as the communication protocol, which requires our software engineers have a certain software language, corresponding to different communication protocols of sensor values on a software implementation is entirely possible.