Container usually need to withstand the impact of climate conditions or related to the production. In the new outdoor bin (bunker, coal), must comply with building regulations. If the dangerous goods, and expected use forklift operation, on the roof of container should also often for lifting to protect it.

Weight distribution

When container support in three bearing point, each load point when setting up a sensor, to determine the weight of the container sensor optimal regulation. For vertical or hanging cylindrical container, when the three sensors and isometric tank vertical axis, and each other in the plane into a 120 ° when meet the best uniform condition.

If not all support in a device made up on the sensor, the non-uniform distribution is suitable for bearing load. If the container by four or more than four bearing, must consider all bearing point of sensor.

Container center of gravity

Full container center of gravity should be less than container bearing point. The location of the center of gravity point changes along with the height of filling amount, center of gravity position on a vertical movement, with a sensor weighing apparatus manufacturing equipment is possible. If the filler of the center of gravity is changing with the centerline of lateral movement, then all bearing point should match with sensor.

Container loading and unloading, such as interface

Container is often need to loading and unloading other interfaces, such as the contents of a container loading and unloading, container electronic, hydraulic or pneumatic and other ancillary equipment.

The influence of container loading and unloading of the interface can produce additional force, lead to the error of the measuring accuracy of scales. When the connection is not flexible rigid pipe, container connected to a horizontal tube as long as possible. It produces the corresponding smaller stress acting on the sensor, the measuring accuracy is not important.

Sections easily bend of the connecting pipe can be instead of long horizontal pipe to avoid additional force. The other to reduce the possibility of additional force is through configuration arc tube. Cases, introduced in vertical pipe, usually by bellows compensation implementation.

Pressure load

In a closed device, the system pressure have influence, with the result of weighing especially in chemical industry. When vertical connection pipe in the container, there is direct access to additional force measurement. The impact of corresponding to the pressure and the product of the pipe section, so it is best to use horizontal connecting pipe.