For liquid, bulk cargo, such as homogeneous objects, there are two fixed base and a sensor configuration is feasible. Conditions are symmetric capacity construction, and fill the focus line approximately in the whole loading process in a vertical line. Other conditions, especially in the higher precision, it must be equipped with three or more sensors.
Rigid 1 sensor installation
This simply on the bearing body rigidity to install sensor structure is generally not recommended, this structure can't avoid due to loading condition changes, the sensor vibration, temperature change caused by deformation of measurement error.
2 installation has two bearing body and a sensor
This measurement system using a pendulum sensor and two fixed support, they also plays a role of fixed set of tank container at the same time, the low price on the structure of the sensor must be to avoid measurement error.
3 support in three or four sensors on the tank container
Most accurate loading condition with three sensor for measuring element, but also visible to four configuration in the orthogonal symmetric structure. Particularly high for vertical tank, in the above parts required to install additional guide rod, is generally not recommended rolling DangZi or rope guiding device.
4 USES three different weighing module
Three weighing module, the guide bar circumscribed in outer structure, which does not need other measures, and keep a steady level. Also have protection against uplift can prevent tank capsized. Use the standard weighing module can simplify the structure, can greatly save the cost of the structure, but must consider the bearing surface parallelism, highly aligned, and so on details.
5 application weighing module on the vertical tank with rim
Usually found in practice circular vertical tank shell generally reached the bottom, to ensure the stability of the whole structure, this need special installation properly installed sensors. A circular sealing ring to seal is needed in this structure, it is very soft enough to create additional force.
6 installation has four sensors loading station of the rectangular storehouse
Transport, loading and unloading equipment under vibration, due to the effect of acceleration would make rectangular storehouse is very unstable. This case, the special needs in advance considering the stability of the pre-tightening force of guide rod fixation. Orthogonal symmetric structure is conducive to stability, general with elastic support body sensor at the same time, such as a pendulum sensor.
