With the development of science and technology industry, the aerospace industry such as the growing demand for acceleration sensor, acceleration sensor and other sensors, has a special form of signal transmission and special way of installation. We know, general acceleration sensor installation, the first is mounting surface should be measured vibration axis vertical, and install to smooth clean surface, in order to improve the sensors and measured coupling, can put some clean silicon grease. This is for precise measurement acceleration data is very important.

Due to the installation of the acceleration sensor has a variety of forms, forms that let's acceleration sensor installation considerations for a thorough understanding. First there is the installation of the screw connection forms: most of the acceleration sensor with mounting screw, general sensors are M5 standard screws, with high strength structural steel production; This acceleration sensor base junction surface must be reliable connection analyte and closely, we must be in strict accordance with the requirements for installation, installed the M5 screw torque recommended for 20 kg · cm. Second is magnetic installation form connections: magnetic installation points of insulation and insulation two classes, connecting screw has a metric and imperial M5 1/4 inch, and other specifications. Magnetic suction is analyte in a sample is not convenient to play when installing threaded hole. The requirements of the installation surface and the vertical vibration axis, and level off, smooth, and strong suction of ferromagnetic materials. Finally, a form of installation is adhesive bonding forms: the connection form is very simple, but need to pay attention to cementing surface according to the cleaning process should be clean. The acceleration sensor in a wide range and high frequency signal to calculate cementation strength after use, so as not to cause distortion of measured data.