Mechanics sensor in the sensor is one of the most common sensor, you may see less is the use of a single weighing sensor, and often the most common is the combination of multiple weighing sensor. A high accurate precision electronic weighing apparatus, for example, rarely adopt a weighing sensor, often have more than three or two sensors to form a sensing system on the one hand is to maintain a balance of the stability of the body itself, on the other hand can increase weighing tonnage.

In composed of multiple sensors electronic weighing apparatus, should be reasonably selected in addition to load and correct installation of the weighing sensor, also should be paid attention to: 1, should be on both sides of the weighing sensor with fixed pillar and jack stand. Fixed pillar should be slightly lower than the height of the sensor height 3 mm to 4 mm, so need to replace or maintain sensor, jack is used to change the top of the scale body, again in the fixed pillars into the appropriate thickness of the mat iron, the sensor with stents release 4 mm to 5 mm, as a temporary support on the other hand, when the scale body overload, protect the sensor. 2, in order to prevent the scale body caused by impact of the structure of horizontal movement should be according to the balance of body equipped with the proper limit. Stop when installation should not exert any force in the vertical direction, but can offset the role in the various levels of physical force. 3, weighing sensor must be installed in horizontal plane, also must keep level under load, to prevent uneven load distribution and the damage caused by the tilt sensor.

The installation of the combination of multiple weighing sensor is the most important problem is the most important thing to notice, because the weighing sensor installation directly affect the accuracy of weighing sensor and use fixed number of year, not accurate installation will not only result in measuring error, and the wrong method of use for a long time will lead to a sensor used to produce qualitative changes.